How to Make Big Machines Mobile, Without Sacrificing Precision

If you work with big industrial machinery, you probably know how difficult it is to move the equipment around the floor. When it comes time to rearrange the floor for greater efficiency, or when you want to buy or sell some equipment, moving machines becomes a whole huge production, requiring all kinds of manpower to lift and carry a heavy piece of equipment.

You run the risk of dropping and damaging the machine, and you lose out on precious manpower time from moving stuff around. Luckily, there’s a way for you to make your machines mobile without losing out on precision and accuracy.

Leveling Casters

The solution is to install a set of leveling casters on your machines. You might be skeptical, worried that casters will make your equipment lie off-kilter on the floor. This might be a concern with sub-par casters, which is why many people prefer to lug the machines around the old-fashioned way without putting casters on their equipment.

With leveling casters, however, there is a leveling mechanism built in that will lift or lower the equipment where the caster is attached, ensuring that everything will remain perfectly level even though you have four casters attached.

Stay on the Level

With the use of leveling casters, you can move a piece of equipment safely and easily anywhere on your work floor, and once it’s placed exactly where you want it, you can adjust the leveling to make sure that the machine is sitting perfectly flat on the floor. You’ll finally be able to achieve the dream of having an easily movable piece of equipment that also sits perfectly level on the floor, reducing the man hours lost moving stuff around and reducing the chance of breaking delicate machinery.

The Simple Tip for Your Medical Center That Can Save Time and Lives

In the medical field, you know that tiny changes can save — or cost — lives. When a patient is in

extreme medical distress, the crash cart needs to get there immediately, and a delay of a few seconds can mean the difference between life and death. On top of that, a medical office needs to operate more efficiently than many businesses, since doctors have to keep moving from patient to patient to have any hope of making it through their mountain of work.

When it comes to efficiency, even the smallest changes can have huge effects, and if you’re like most medical professionals, there’s an area for major improvement that you probably haven’t even considered.

Replace Your Casters

Few, if any, medical professionals pay the kind of attention that they should to the caster wheels on their equipment. When was the last time you pushed around one of your equipment carts? What was it like? Were you able to glide along smoothly and freely? Or was it like pushing along one of the grocery store carts that has the busted squeaky wheel?

Equipment with bad casters will make pushing a cart from one end of the medical center to the other a frustrating chore, which can be particularly problematic in an emergency situation.

Keep Your People Moving

Equipment with bad casters can cause a whole host of issues, from slow response time to the possibility of tipping a cart over and damaging sensitive equipment. Your carts need to move quickly and without delay, especially when a patient is crashing, and a cart with a sticking caster wheel could end up costing lives.

Don’t put your staff and patients at risk due to something so simple; make sure that your casters are new, clean, and unhindered, and that your carts can move quickly and smoothly over the floor.